FabLab Inventory
The following list is inventory located within the FabLab.
C02 Lasers
| Name | Status | Manufacturer/Model | 110/220 | Power | Training/Qualification Required | Inventory Tag | Owned/Donated/Loaned |
| Fat Bastard | Up | GWEIKE/LC1390N Work Area: 1300mm x 900mm | 110-220V±10% | <1,500W | Yes | Currently Unassigned | Owned / Chatt*Lab Makerspace |
|---|---|---|---|---|---|---|---|
| Dr. Evil | Upgrading | Full Spectrum Laser/PS24X16+ Work Area: 610mm x 406mm | 110 | <1000W | Yes | Currently Unassigned | Owned / Chatt*Lab Makerspace |
3D Printers (FDM)
| Name | Status | Manufacturer/Model | 110/220 | Power | Training/Qualification Required | Inventory Tag | Owned/Donated/Loaned |
| Archer | Down | Creality/Ender 3 V2 | 110 | 300W | Yes | Currently Unassigned | Owned / Chatt*Lab Makerspace |
|---|---|---|---|---|---|---|---|
| Lana | Down | Creality/Ender 3 V2 | 110 | 300W | Yes | Currently Unassigned | Owned / Chatt*Lab Makerspace |
| Cyril | Up | Creality/Ender 3 V2 | 110 | 300W | Yes | Currently Unassigned | Owned / Chatt*Lab Makerspace |
| Kreiger | Up | Creality/Ender 3 V2 | 110 | 300W | Yes | Currently Unassigned | Owned / Chatt*Lab Makerspace |
| Malory | R&D Use Only | Creality/Ender 3 V2 | 110 | 300W | Yes | Currently Unassigned | Owned / Chatt*Lab Makerspace |
3D Printers (MSLA)
As of right now, we currently don't have any MSLA printers. We are in the works in acquiring one once we resolve the Elegoo Mars inventory issue.
| Name | Status | Manufacturer/Model | 110/220 | Power | Training/Qualification Required | Inventory Tag | Owned/Donated/Loaned |
| N/A | N/A | N/A | N/A | N/A | Yes | Currently Unassigned | Owned / Chatt*Lab Makerspace |
Supply Locker
The Supply Locker contains consumables for Member use. This locker is NOT to be used as Member storage, refer to the Personal Material Policy for more information. The available items will be listed below, along side with what the cost of use is and which pieces of equipment they have been approved for use on. Do NOT use materials on equipment they are not approved for. If there is any confusion or clarification is needed, reach out to the FabLab Area Lead for more information.
| Material | Price | Comments |
| N/A | N/A | N/A |
Maintenance Locker
The Maintenance Locker is locked to prevent items from going missing. The locker contains many items used within the FabLab to perform maintenance on the equipment listed above, such as the C02 Lasers and the 3D Printers. Those who have been Trained/Qualified to perform maintenance will be able to gain access to the locker to assist with any maintenance needed. Reach out to the FabLab Area Lead for more information.
| Item | Comments |
| N/A | N/A |