Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revisionBoth sides next revision
24_inch_vinyl_cutter [2018/04/04 12:40] – admin24_inch_vinyl_cutter [2018/04/04 12:49] – admin
Line 47: Line 47:
 Make sure that the blade can turn freely (by attempting to turn it with your Make sure that the blade can turn freely (by attempting to turn it with your
 fingers while the release button of the Blade Carriage is pressed). fingers while the release button of the Blade Carriage is pressed).
-Adjust the blade depth of the Blade Carriage (page 17) and Force setting on the+Adjust the blade depth of the Blade Carriage  and Force setting on the
 cutter (page 8) until you are getting solid, uniform cuts. Start with a blade depth cutter (page 8) until you are getting solid, uniform cuts. Start with a blade depth
 of around 1/64th of an inch and a pressure setting of 100g and try an increased of around 1/64th of an inch and a pressure setting of 100g and try an increased
Line 67: Line 67:
 Sorry.  If you come up with a resolution, please update the wiki with the resolution. Sorry.  If you come up with a resolution, please update the wiki with the resolution.
 |} |}
 +
 +
 +****Blade Setup****
 +{{:vinylcutter_blade_setup.png|(See here)}}