The “Griz” gets used more than any other woodworking tool we have. We have several jigs that helps including a tenoning jig and some cross cut sleds. We have dust collection that gets most of the dust from the saw, but some always gets out of the blade, therefore, safety glasses are ALWAYS required.

We currently have the following accessories with this equipment:

• Tenon Jig
• Dado blade
• Shop Fox fence
• Cross cut sled jig 1
• Cross cut sled jig 2

When using the table saw, please be sure to do the following:

1. Turn on the ambient air cleaners.
2. Enable the Dust Collection for the saw.
3. Make sure you have no loose clothing that can get caught in saw.
4. Use eye protection.
5. Use hearing protection.
6. Use a push stick to push material past the blade, and keep your hands free.