Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
equipment:metal_lathe [2020/09/08 15:37] – created leamonequipment:metal_lathe [2022/09/03 02:57] (current) – [Logan metal lathe] zane_luna
Line 1: Line 1:
-====== Baileigh brake and sheer ======+====== Logan Metal Lathe ======
  
 {{:equipment:20200901_184907.jpg?direct&400|}} {{:equipment:20200901_184907.jpg?direct&400|}}
  
-This machine includes a brake, sheer, and roll.  The brake can be used for making sharp, precise bends in sheet metal.  The sheer is used to cut sheet metal.  And the roll is used to give a gentle curve to sheet metal.+A versatile machine used for turning metal.
  
-The manual can be found [[http://www.baileigh.com/media/uploads/manuals/SBR-5216_12-2015.pdf|here]].+We haven't been able to find a good copy of the manual.  If you know where we can find it, please let us know!
  
 ===== Safety ===== ===== Safety =====
  
   * Safety glasses are **always** required.   * Safety glasses are **always** required.
 +  * Gloves should **not** be worn.
 +  * No loose clothing, jewelry, or long hair around the lathe.  (Remember to take off any rings.)
  
 ===== Special Instructions ===== ===== Special Instructions =====
  
-  * Start the joiner. +  * Please have someone show you how to use this tool.  It should not be used without training.
-  * Holding the work down with some push sticks, feed the wood through.+
  
 ===== Details ===== ===== Details =====
Line 25: Line 26:
 |- |-
 |Manufacturer |Manufacturer
-|Baileigh Industrial+|Logan
 |- |-
 |Model |Model
-|SBR-5216+|2527 VLH
 |- |-
-|Bed width +|Center distance 
-|52 inches (1312mm)+|35 inches
 |- |-
-|Sheer capacity +|Bed length 
-|16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel+|55 inches
 |- |-
-|Brake capacity +|Spindle nose 
-|16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel+|2 1/4 inch diameter, 8 threads per inch
 |- |-
-|Roll capacity +|Spindle bore 
-|16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel+|1 3/8 inch
 |- |-
-|Maximum bend angle +|Tailstock 
-|90 degrees+|Standard tailstock
 |- |-
-|Minimum roll diameter +|Drive belt 
-|2.38 inches (60.5mm)+|Variable speed
 |- |-
-|Box depth +|Stand 
-|4 inches +|Cabinet stand
-|- +
-|Frame and base material +
-|Cast iron +
-|- +
-|Brake material +
-|Ground steel w/ hardened edge +
-|- +
-|Sheer table material +
-|Precision ground cast iron +
-|- +
-|Sheer blade material +
-|Hardened steel +
-|- +
-|Sheer hold-down clamp material +
-|Spring loaded cast iron +
-|- +
-|Power requirement +
-|Manual (raw muscle power, aided by some leverage)+
 |- |-
 |Owner |Owner
-|ChattLab+|Tim Youngblood
 |- |-
 |} |}