This is an old revision of the document!
Table of Contents
Baileigh brake and sheer
This machine includes a brake, sheer, and roll. The brake can be used for making sharp, precise bends in sheet metal. The sheer is used to cut sheet metal. And the roll is used to give a gentle curve to sheet metal.
The manual can be found here.
Safety
- Safety glasses are always required.
Special Instructions
- Start the joiner.
- Holding the work down with some push sticks, feed the wood through.
Details
| Attribute | Detail |
| Manufacturer | Baileigh Industrial |
| Model | SBR-5216 |
| Bed width | 52 inches (1312mm) |
| Sheer capacity | 16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel |
| Brake capacity | 16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel |
| Roll capacity | 16 gauge (0.060 inches, 1.90mm) mild steel, or .039 inches stainless steel |
| Maximum bend angle | 90 degrees |
| Minimum roll diameter | 2.38 inches (60.5mm) |
| Box depth | 4 inches |
| Frame and base material | Cast iron |
| Brake material | Ground steel w/ hardened edge |
| Sheer table material | Precision ground cast iron |
| Sheer blade material | Hardened steel |
| Sheer hold-down clamp material | Spring loaded cast iron |
| Power requirement | Manual (raw muscle power, aided by some leverage) |
| Owner | ChattLab |