Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Last revisionBoth sides next revision
metallab [2020/06/11 00:23] – created adminmetallab [2020/06/11 00:24] – admin
Line 1: Line 1:
-sfasdfasdfasdf+====== WoodLab ====== 
 +The WoodLab is a nearly fully functional woodshop, including a paint booth. This page outlines many of the pieces of equipment, ways of reaching out for help as well as reference materials used to support the WoodLab. 
 + 
 +If you use this area, please be sure to be famliar with all of the posted rules.. 
 +==== Rules ==== 
 +=== Report all Injuries=== 
 + 
 +  * Do not attempt to remove foreign objects from the eye or body.  
 +  * If chemicals get in the eye(s), wash eye(s) for 15 minutes in an open flow of water before proceeding for medical treatment. 
 + 
 +===Use protective gear. Dress right.=== 
 +  * Wear eye protection: safety glasses with side shields, goggles, or face shields at all times, whether working or not!!  
 +  * Do not wear loose-fitting clothing around moving or rotating machinery.  
 +  * Remove ties, jewelry, gloves, etc. especially around moving or rotating machinery.  
 +  * Tie back or cover long hair to keep it away from moving machinery.  
 +  * Wear only shoes that cover the entire foot, no open-toe shoes.  
 +  * Wear suitable gloves when handling hot objects, glass, or sharp-edged items.  
 +  * Wear appropriate clothing for the job (i.e., do not wear short sleeve shirts or short pants when welding). 
 +=== Prepare === 
 +  * Safety is your top priority when using the shop. If you are not sure what you are doing, ask.  
 +  * Know all the locations of all first aid, fire, and safety equipment.  
 +  * Never use a tool unless you’ve been trained to use it safely.  
 +  * Do not work in the shop if tired, or in a hurry.  
 +  * Do not fool around, startle, or distract anyone (not even with a conversation) while either one of you is using a tool.  
 +  * Think through the entire job before starting. Prepare prints or drawings with all dimensions and specifications prior to using machines. 
 + 
 +=== Use tools properly=== 
 +  * Use tools only as they were designed to be used. (A wrench is not a hammer.)  
 +  * Never use a broken tool.  
 +  * Report any broken tools or machines immediately.  
 +  * Do not remove tools from Chattlab Makerspace.  
 +  * Never walk away from a tool that is still running.  
 +  * A hard hammer shouldn’t be used to strike a hardened tool, wood tool or any machine part. Use a soft-faced hammer.  
 +  * Operate machines only with all required guards and shields in place. **Return guards if they must be removed**. 
 + 
 +===Clean Up=== 
 +  * Clean up every time whenever you leave an area, including sweeping the floor. 
 +  * Clean and return all tools to where you got them.  
 +  * Use compressed air sparingly; never aim it at another person or use it to clean hair or clothes.  
 +  * Shut off and unplug machines when cleaning, repairing, or oiling.  
 +  * Never use a rag near moving machinery.  
 +  * Use a brush, hook, or a special tool to remove chips, shvings, etc. from the work area. Never use the hands.  
 +  * Keep fingers clear of the point of operation of machines by using special tools or devices, such as, push sticks, hooks, pliers, etc.  
 +  * Keep the floor around machines clean, dry, and free from trip hazards. Do not allow chips to accumulate.  
 +  * Mop up spills immediately and put a chair or cone over them if they are wet enough to cause someone to slip.  
 + 
 +===Project/Wood Storage=== 
 +  * If clamping work, leave note on when it’s safe to remove clamps. 
 +  * Any projects left overnight must be cleared with the area lead. 
 +  * Do not store wood unless you are renting space, or cleared with Area Lead.  Otherwise it’ll be thrown away or put in free bin. 
 + 
 + 
 +==== Photos ==== 
 +{{:wood_lab.jpg?direct&200 |}} 
 +{{:wood_lab2.jpg?direct&200 |}} 
 +{{:wood_lab3.jpg?direct&200 |}} 
 +{{:wood_lab4.jpg?direct&200 |}} 
 +==== Equipment ==== 
 +  * {{page>[grizzly_cabinet_saw]&firstseconly&link}} 
 +  * {{page>[Large CNC]&firstseconly&link}} 
 +  * {{page>[Ryobi Chopsaw]&firstseconly&link}} 
 +  * {{page>[Delta Drill Press]&firstseconly&link}} 
 +  * {{page>[Router Table]&firstseconly&link}} 
 +  * {{page>[Dust Collectors]&firstseconly&link}} 
 +==== Materials ==== 
 +{{page>[workshopsupplies#woodlab_equipment_materials]&firestseconly&link}} 
 + 
 +===== Support Contacts ===== 
 +{| class="wikitable" 
 +! style="text-align: center;" | Contact Link 
 +! style="text-align: center;vertical-align:middle;" | Description 
 +|- 
 +| [[contact_woodlab|WoodLab Team]] 
 +| WoodLab email list. This list is all our woodworkers that help support our equipment. 
 +|- 
 +|[[profiles:jeffjohnson|WoodLab Area Lead]] 
 +| Area Lead contact info. 
 +|- 
 +|[[EquipmentRequest|Equipment/Material Request]] 
 +| This form will allow members to request new equipment or supplies. 
 +|- 
 +|[[wiki_contact|Wiki Updates]] 
 +| Click here to report something wrong with the WoodLab page. 
 +|} 
 + 
 + 
 +===== Reference Materials ===== 
 +{{ :reference:woodlab:woodlab_rules_x.pdf |}} 
 +{{ :reference:woodlab:woodlab_support_poster.pdf |}}