Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
fablab [2017/08/06 18:38] – created adminfablab [2023/11/17 23:33] (current) – [Support Contacts] adam_guinn
Line 1: Line 1:
-====== Fablab ======+~~NOTOC~~ 
 +====== FabLab ====== 
 +The FabLab gives us the ability to bring our ideas into physical form. We mainly use 3D printers for Modeling and Laser Cutters for 2D Cutouts. 
 + 
 +===== Rules ===== 
 + 
 +  * **Do not leave trash in the FabLab!** 
 +  * If you are working on a project and must leave, please leave a dated note to prevent others from disturbing it.  If a project is without a note, has been left longer that 48 hours, or is an obstruction to others' projects, it may be moved. 
 +  * Leave the existing workstations in the same state as they were before you used them.  Software updates and new software for your projects are fine.  If a new program starts an item on boot, please disable it. 
 +  * Report any maintenance issues as soon as possible.  This includes the facility, hardware and software. 
 +  * If you wish to use other operating systems, only run them off removable media.  The PCs have software that is expensive and its integrity should be respected. 
 +  * Do not use the PCs to view pornographic material.  Neither members nor their guests should be made to feel uncomfortable. 
 +  * Do not set the heat higher than 25C.  This is to prevent damage to hardware and ensure the comfort of members. 
 + 
 + 
 +===== Clean Up ===== 
 + 
 +  * Return chairs to the workstations if you move them. 
 +  * Leave a clear area for others to work on repair if you are working on a hardware project. 
 +  * If you see trash, throw it out, even if it is not yours. 
 +  * If something presents a trip hazard, please move it. 
 +  * Turn off the lights if you are the last person to leave. 
 + 
 +===== Equipment ===== 
 +  * {{page>[pc_inventory#pc_lab_computers]&firestseconly&link&nouser}} 
 +  * {{page>[Computers]&firstseconly&link}} 
 +  * {{page>[Printers]&firstseconly&link}} 
 +  * {{page>[Miscellaneous]&firstseconly&link}} 
 + 
 +===== Frequently Asked Questions ===== 
 + 
 +===== Support Contacts ===== 
 +{| class="wikitable" 
 +! style="text-align: center;" | Contact Link 
 +! style="text-align: center;vertical-align:middle;" | Description 
 +|- 
 +|[[EquipmentRequest|Equipment/Material Request]] 
 +| This form will allow members to request new equipment or supplies. 
 +|- 
 +|[[contact_wiki|Wiki Updates]] 
 +| Click here to report something wrong with the FabLab page. 
 +|}
  
-The Fablab is where we have our advanced manufacturing stuff (3D printer(s), vinyl cutter and laser cutter(s)).