Shop Fox 14" band saw

Good for cutting curves in wood, or resawing lumber.

The manual can be found here

• Safety glasses are always required.
• Hearing protection and dust masks are highly recommended
• Keep the blade guard down as far as possible, to leave only the necessary amount of the blade exposed for the work you're doing. This can be adjusted by easing off the adjustment screw on the right hand side and using the wheel at the back to adjust the guard up or down. Be sure to right tighten the adjustment screw afterward.

• Start the saw.
• Feed your work into the saw in a controlled fashion, not too quickly.
  • If you find burn marks on your wood, you need to move the wood through the saw a bit more quickly, or reduce the saw speed.

* Make sure the saw comes to a complete stop when you're done using it.